SAFETY-SEAL Automotive is a one time treatment that is an easy-to-use, do-it-yourself product and is fully warranted to perform as described when properly applied. Here's how SAFETY-SEAL Automotive works. Once inside the tire, SAFETY-SEAL will evenly "coat" the tire liner, sealing open pores and stopping any air leakage. The moment a puncture or leak occurs, the combination of centrifugal force and the "jet" action" of escaping air propels SAFETY-SEAL into the wound sealing it instantly and completely.

SAFETY-SEAL plugs punctures up to 1/4 inch in diameter in the tread area of tires. The air lock action is instantaneous as the vehicle travels. As the tire rolls, the plug becomes fully fused and is impervious to water, mud and chemicals. The entire sealing action takes a fraction of a second, and air loss is usually ungaugeable.

There are many "general type" tire sealants on the market (aerosols and liquid) that are not permanent repair products but are just temporary "band aids" that may or may not work. Several aerosols use an explosive gas to propel the product into the tire and are known to be extremely flammable. These products should not be used if a chance of spark or flame could cause a problem.

SAFETY-SEAL is a non-flammable liquid that seals all punctures in the tread area permanently. The mixture is designed to adhere to the sides of the puncture and builds to a solid plug as the rubber spreads under load. The process takes only a few revolutions of the tire and does not require the tire to be "patched or plugged" once the puncture has been sealed. SAFETY-SEAL will remain stable to -30 degrees.

SAFETY-SEAL Automotive is effective in all tubeless tires and the product is water soluble for easy clean-up.