USA "SAFETY" TIRE SEAL
LABORATORY TESTS CONFIRM PERFORMANCE
The Institute for Research, and independent laboratory located in Houston, Texas, conducted numerous performance
tests of SAFETY-SEAL using major brands of truck tires.
Its conclusions:
"...sealed punctures were made by an assortment of screws and nails up to one-quarter inch in diameter
in both the tread and valley areas...the treatment acted instantaneously and no loss of pressure was observed in
both soapy water and guage tests."
"...road tests indicated no shimmying or vibration of the vehicle and no effect on the balance of the tire..."
"...it is non-corrosive to mild steel used in wheel rims"
"...the ability to maintain its physical integrity and sealing roperties over prolonged periods should make
it economically attractive to large fleet operations."
MILLIONS OF FLAT-FREE MILES
In addition, SAFETY-SEAL has been "road tested" over millions of miles by a wide range of commercial
and industrial customers. Customers and vehicles have included:
»Heavy duty trucks
»Independent trucking fleets
»Off-the-road vehicles
»Sanitation trucks
»Commercial freight haulers
»Intermodal lines
»Industrial/construction equipment
»Golf carts, shuttle/tram vehicles
Customers report the following tire-saving advantages:
»Tire life extended 20 percent or more
»Sharply reduced incidence of punctures and flats
»Higher value tire casings in better retread condition
»No need for additional tube in tubeless tire
»Less operator fatigue due to unbalanced tires and vibration